Results 1 to 10 of 10

Thread: Slight Pacifier Modification help?

  1. #1

    Default Slight Pacifier Modification help?

    Hello everyone! I was wondering if it was possible to attach a handle I took from a old paci and attach it to my new one here. I am a little to scared to damage it..because it took me forever to find this particular style/design of paci.




  2. #2

    Default

    Hi Shyanne your going to have to drill two holes in the pacifier back of the guard one on each side. The holes should be large enough to push the clip on without it coming out. Make the holes a little small and enlarge with a model knife. You going to have to push to force the clip in but once it's in you will have a good time.

    Have fun bn3baby

  3. #3

    Default



    Quote Originally Posted by bn3baby View Post
    Hi Shyanne your going to have to drill two holes in the pacifier back of the guard one on each side. The holes should be large enough to push the clip on without it coming out. Make the holes a little small and enlarge with a model knife. You going to have to push to force the clip in but once it's in you will have a good time.

    Have fun bn3baby
    but if i attach them to the back of the gaurd wouldnt they touch my mouth when I use the paci and feel annoying to me?

  4. #4

    Default

    I agree with the method that bn3baby suggested although from the looks of it, the rounded front of the Paci looks like it could be too wide for the handle to go around it correctly, that is what I would worry about. As for hitting your mouth, if you do it as suggested, it shouldn't be any different than any other paci with a handle, just make holes in the sides where the front decorated area meets the mouth guard. There is likely enough frame holding it together, that two holes shouldn't stop it from holding together, I have never done it before though, so I can't promise anything. As I said though, I would be worried about the handle being wide enough.

    - - - Updated - - -

    If you are wanting a handle for the use of a paci clip, then maybe you should try something like this first. http://www.amazon.com/gp/aw/d/B00EM5...7VL&ref=plSrch

  5. #5

    Default



    Quote Originally Posted by Tyger View Post
    I agree with the method that bn3baby suggested although from the looks of it, the rounded front of the Paci looks like it could be too wide for the handle to go around it correctly, that is what I would worry about. As for hitting your mouth, if you do it as suggested, it shouldn't be any different than any other paci with a handle, just make holes in the sides where the front decorated area meets the mouth guard. There is likely enough frame holding it together, that two holes shouldn't stop it from holding together, I have never done it before though, so I can't promise anything. As I said though, I would be worried about the handle being wide enough.

    - - - Updated - - -

    If you are wanting a handle for the use of a paci clip, then maybe you should try something like this first. http://www.amazon.com/gp/aw/d/B00EM5...7VL&ref=plSrch
    Ya but how would that clip attach? Hrm im still scared of ruining it tho..

  6. #6

    Default

    Those clips are supposed to go around the ones without handles. Since yours is a bit more oval, it might have a hard time, but if you can force it on, it should fit around the mid section just fine assuming that the pacifier is normal sized as side from the nipple. If it doesn't fit, you can just return it to amazon, or look for one at walmart, and then you can return that one there. Might be better than risking damaging your paci.

  7. #7

    Default



    Quote Originally Posted by Tyger View Post
    Those clips are supposed to go around the ones without handles. Since yours is a bit more oval, it might have a hard time, but if you can force it on, it should fit around the mid section just fine assuming that the pacifier is normal sized as side from the nipple. If it doesn't fit, you can just return it to amazon, or look for one at walmart, and then you can return that one there. Might be better than risking damaging your paci.
    Ohhh okies! Ill give it a shot! Thanks!

  8. #8

    Default

    Try Walmart first, amazon will charge you for returns unless it is defective

  9. #9

    Default

    Without damaging anything up front - just tie a pretty ribbon thru the large holes on both sides of the mouth piece.
    Use these ribbons to fasten the paci in place by tying them off at the back of the head. You will not have the neat
    ring piece extending in front of the round white piece with the sun and moon image. If you had laid these next to
    a ruler for reference might have had a better grasp of space for the partial ring to be fastened behind the round
    white image piece.
    The idea I get is to drill two small indent holes behind that white cover piece with the partial ring SNAP fitting into the
    indent holes with enough tension to stay in place and with enough clearance being able to flip out in front of the
    white cover piece. Attach a string ribbon or jewelry chain to secure it to a neck collar or Peter Pan collar with a
    pin of sorts.
    But in simplicity without much ado just forego the modifications - use ribbons thru the existing holes to prevent
    spitting out the paci and as a discipline method. If you are a well behaved
    good adult baby you won't be spitting anything out and can do without any
    extras aids - would be awful nice to have the partial ring piece with a neat
    little bell ding a linging !

  10. #10

    Default



    Quote Originally Posted by Shyanne View Post
    but if i attach them to the back of the gaurd wouldnt they touch my mouth when I use the paci and feel annoying to me?
    Hi Shyanne. Sorry I didn't get back to you sooner but I was cutting trees all day and I have to say I am getting to old for that. This photo shows what I was thinking you kill need to do it's not a big job so take your time and go for it. You can do a great job.

    Click image for larger version. 

Name:	pacifier 001 (640x480).jpg 
Views:	81 
Size:	54.2 KB 
ID:	24283

Similar Threads

  1. Any other body modification enthusiasts?
    By ModdedPrincess in forum Off-topic
    Replies: 4
    Last Post: 08-Apr-2013, 04:14
  2. Braces-Friendly Adult Pacifier/Pacifier Analogue?
    By Bearhardt in forum Adult Babies & Littles
    Replies: 5
    Last Post: 10-Nov-2012, 01:04
  3. Baby Diaper Modification
    By DracosWing in forum Diaper Talk
    Replies: 3
    Last Post: 20-May-2011, 07:52
  4. body modification
    By sparkywuff in forum Mature Topics
    Replies: 92
    Last Post: 28-Jan-2010, 01:21
  5. diaper modification
    By kitty0230 in forum Diaper Talk
    Replies: 9
    Last Post: 15-Feb-2009, 17:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ADISC.org - the Adult Baby / Diaper Lover / Incontinence Support Community.
ADISC.org is designed to be viewed in Firefox, with a resolution of at least 1280 x 1024.