How to make diaper doublers

From ADISC Answers Wiki

Because of persistent vandalism, this article has been protected from editing. If you want to make changes to the article, please request them on the article's discussion thread or request unprotection.

A diaper doubler is like having an extra diaper, but without the bulk. They can be cut in whatever size works best for you. There is also no end to the possibilities of fabric combination you can use.

Every baby is different...some babies are heavy wetters so will need either 8 layers of flannel or 2 layers flannel and 2 layers terry cloth.

Another great idea would be to add a layer of polar fleece on one side of the outer. Fleece draws wetness away from baby and helps keep the skin healthy and dry.

Procedure

1. Cut an 8" by 25" rectangle of your fabric of choice (or plain paper will do too) to use for a pattern.
2. Using this piece as a guide, cut your desired number of layers for your doubler. Either 8 layers of flannel or two layers of flannel with two layers of towel terry inside, is recommended.
3. Stack all layers together and straight stitch about 1/4" from the edge.
4. Trim edges even if needed and then zigzag or serge the edges encasing them.

On a more frugal note, this is a great place to use those towels and receiving blankets again.

Note: These directions are modified from the directions for making doublers for newborns through toddlers. Some adjustments in measurements may be necessary for a perfect fit!