double diapering
I've double diapered with the store brands of diapers by slitting in a few places on the one on the inside and then putting the second one on. I read about this next one several years ago and it also works, although it takes a while to complete. the following steps are required, Unfold the diaper that you want on the inside, cut off all excess material wings and etc, be sure to cut off the leak guards from the inner diaper, this helps the inner diaper to lay flat, and then put holes or slits in the outside portion of the diaper. Spread out the diaper that you want to be your outside diaper, take and spray a light coating of canned glue on the inside of this diaper, then spray a light coating in the slit side of the inside diaper after about a minute you can put the inside diaper on the inside of the glued side of the outer diaper, be sure to stretch out both diapers to make them smooth. You have to give the glue time to dry some before putting the double diaper on. With this method, you have a double diaper with only 1 set of tapes to deal with.