![]() |
|
|
#3 (permalink) |
|
Regular
|
Yea, I used huggies, and pampers , and I use tena guards, they work great as long as you put alot of holes in the back plastic on the gurads, the others I just put on and cut them with a knife just break thru the outer layer.
I like the baby diapers but they don't hold much but make a good stuffer slowing down the urine to go in the outer diaper. |
|
|
|
|
#6 (permalink) |
|
Um, yah?
Historical Donor
|
THe stuffer/diaper doubler that I have found to be the cheapest and most effective is the Depends boost insert. I have found that they increase the absorbancy and make the diaper thicker. You also can add more than one if you wish. You can buy them at most drug stores and the Walmart by me sells them also. Hope you found this informative.
|
|
|
|
|
#10 (permalink) |
|
Aysc.qm
Historical Donor
Staff Member |
Mmm, this is the one stuffer I have tried and it works alright. As I'm sure you all (hopefully) know, Goodnites don't have a great capacity and they tend to leak. Perfect for a stuffer, considering you don't actually want the stuffer to retain your output. Although, be a little careful though, I found that if not setup right, your diapers will actually become more prone to leaking - having your urine flood the stuff and then just leaking out the sides from that.
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|